Search This Blog

Friday, October 31, 2014

Tiling and Grouting in Same Day

Tile and Grout in the Same Day? YES!

 
The live feed blog written the other day focused on a backsplash that was completed in about 4 hours. The blog post walked the reader through the backsplash installation from start to finish. It was installed and grouted within this 4 hour time frame. Now there are some installers and manufacturers of tile and tile products who will tell you  that you have to wait 24 hours before grouting tile. In some instances this is completely true. Whenever using tile adhesives the time required for the premixed stuff is 24 hours .
 
However I am a mason and all tile I install is set and installed with concrete. And I know from my years as a stone mason and tile installer that concrete is concrete no matter  grout or thin set it is still concrete. If  you use the correct thin set and the weather allows your tile to dry beyond the phase of still moving then applying the grout is not a issue again as long as the tile is set enough not to move. Now I must also be clear that NEVER at any time do you walk on tile before the 24 hour drying time because this WILL weaken the bond of the tile to the floor. In this instance it was a backsplash so walking on the tile to grout it was not a issue. IF you have questions or comments about this post FEEL FREE TO COMMENT WE INVITE ALL COMMENTS AND LOVE TO HEAR ALL POINTS OF VIEW  HERE SO OUR BLOG READERS GET ALL THE INFO POSSIBLE   regards   chris

1 comment:

Featured Post

Home Renovation From Gut Rehab in Less Than 4 Months!

Home renovation finished products This house is a gut rehab ¹ job. My team and I started this project in April 2019 and it is now compl...

Our Most Popular Posts