article thumbnail

Addressing Low Grout Joints with Tile Installation Standards

Ceramic Tile Education Foundation

Have you looked at the photos in this article and noticed a real problem? They all demonstrate low grout joints which do not meet the tile industry standards. To meet these standards, the grout must adequately fill the space which obviously these examples do not. Have you found yourself in a similar situation?

article thumbnail

ANSI Accredited Standards Committee (ASC) A108

The Tile Council of North America Blog

The Committee works to develop standards which define the installation of ceramic and glass tile as well as the test methods, physical properties, and sustainability of ceramic and glass tile, and installation materials. Manufacturers - Those companies that manufacture ceramic tile or associated products (mortars, grouts, backerboards, etc.)

Standards 100
Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Avente Tile Talk: Removing Grout Haze in a Cement Tile Installation

Tile Talk

Removing Grout Haze in a Cement Tile Installation. Today, I discuss grout haze – a problem that often occurs with both ceramic and cement tile installations. I’ll explain what grout haze is, how to correctly identify the problem, and why it occurs. Cement tiles that needs to be grouted. What is Grout Haze?

Grout 130
article thumbnail

Bringing a Modern Country Look to an Old Farmhouse Bathroom

Architectural Ceramics

The standard rough in is 12”; however, I had to buy a 14” rough in because our drain was set out further from the wall. I wish I’d read that article before I started! Grout Sealer: When I was remodeling my kitchen a while back, I didn’t seal my kitchen grout in time-big mistake! The measure it again.

Seattle 100
article thumbnail

Avente Tile Talk: Installing a slate tile floor

Tile Talk

Now this slate comes in an assortment of sizes so laying out the floor isnt as easy as you would get in a standard tile floor. The next step of course is the grout or is it? Slate is a natural stone and you have to seal it before you grout. Labels: Ditra , Grout , Schluter , Slate tile , thin-set. design standards.

Tile 180
article thumbnail

Avente Tile Talk: Cement Tile Backsplash Design, Cost & Installation.

Tile Talk

Here are the first three: Use a very narrow grout line when installing cement tiles. Place cement tiles as close together as possible to create a very thin grout line. Minimizing the grout line will make the design look seamless and your space look larger. We recommend a 1/16” grout joint. design standards.

article thumbnail

Avente Tile Talk: A tile shower installation- Time lapsed video.

Tile Talk

Then the additional layers of tile are added, let to sit overnight and the grout is applied. The grout is applied and then smoothed over as an initial cleanup with a damp sponge and allowed to sit again overnight. Labels: ceramic tile , glass tile , Grout , installation , thin set. design standards. The finished product!

Video 180